Signal Conditioners

EM-SC-01

The EM-SC-01 is an electronic module that converts a 0 to 5 VDC input voltage to a -10 to +10 output voltage.

  • Bare board or in an enclosure
  • Wired or unwired
  • 2 channels per board
  • Wiring instructions included


EM-SC-02

The EM-SC-02 is an electronic module that converts a 12 to 30 VDC input voltage to -10 to +10 output reference voltages.

  • Bare board or in an enclosure
  • 2 channels per board
  • Wiring instructions included
  • Custom configurations available

EM-SC-03

The EM-SC-03 is an electronic module that converts a 0 to 5 or 0 to 10 VDC input voltage to a 0 to 20 or 4 to 20 mA output.

  • Bare board or in an enclosure
  • Wired or unwired
  • Polarity reversible
  • Open loop alarm
  • Wiring instructions included

EM-SC-04

The EM-SC-04 is an electronic module that converts a PWM input signal to an analog output voltage.

  • Bare board or in an enclosure
  • Wired or unwired
  • Suitable for driving the Danfoss PVG 32/120 series of valves from a PWM signal source
  • Wiring instructions included