JS-03

Triple axis, analog output, fingertip size, Hall Effect sensors

Download data sheet     pdf-icon


JS-03

Single and dual axis versions available as a special order item.

 

The JS-03 is a three axis spring return to center miniature size joystick. It uses non contacting Hall effect sensors to give an expected life of more than 4 million cycles.
It has an IP rating of 54 above the panel. The standard output is 0.5V to 2.5V (center) to 4.5V DC.
The joystick housing incorporates a 8 pin Molex connector for the electrical connection.
The JS-03 comes stock with a plain twist knob for the third axis.
Matching single and dual axis versions are available as a special order.
Height27mm above the panel
Length51mm diameter
Width51mm diameter
AngleX and Y: +/- 12 degrees, Z: +/- 30 degrees
Life> 1 Million Cycles
Supply VoltageMinimum 4.5 VDC, Maximum 5.5 VDC, Typically 5.0 VDC
Supply Current6 mA Per axis
Output VoltageMinimum 0.5 VDC, Maximum 4.5 VDC, 2.5 VDC in neutral position, each axis
Linearity+/- 3%
Load ResistanceMinimum 10K Ohms, Typically 100K Ohms
Operating Temp.Minimum -20 °C, Maximum 60 °C
IP RatingIP54 Above Panel

Features

Low parts count
EMI/RFI protected
Factory calibrated output
Low power consumption

Hall Effect Sensors

detect a magnetic field, and output a variable voltage based on position. Long life, extremely accurate.
1

Triple Axis

for LEFT RIGHT
FORWARD BACK
and ROTATE operation

Image Gallery

View an image gallery of possible configurations for the JS-03 joystick.