| Preview | Name | Description | File |
|---|---|---|---|
 | DS-AD-__-R0: | A series of adaptors typically mounted on the mounting pin at the bottom of a grip to accommodate a rubber joystick boot. Stock items are shown, custom adaptors available. |  |
 | DS-AMP CPC Series-R0: | 4 to 37 position, low cost, unsealed connectors for inline and panel mount applications. Stocked parts are shown in the table below, others available. Special crimp tooling is recommended, but not required. Sealing kits, many other options available. | |
| | DS-B Plastic-R0: | B Series injection molded plastic parts in black. Custom colors available, please inquire. | |
 | DS-BT-__-R0: | Description: Flexible rubber boots, typically intended to provide a weather resistant cover for toggle and pushbutton switches. Available in a wide variety of sizes and colors from stock. Please see table below. | |
 | DS-BU-__-R0: | Mounting adapter bushings for the L, S, P, B, O and X series control handles. Available in threaded, clamping, set screw lock, and pendant (hand held) styles. Special threads not listed available at no premium. | |
 | DS-BU-xx-R0: | Mounting adapter bushings for the L, S, P, B, O and G series control handles. Available in threaded, clamping, set screw lock, and pendant (hand held) styles. Special threads not listed available at no premium. | |
 | DS-D Sub-R0: | 3 to 50 position, VERY low cost, unsealed connectors for inline and panel mount applications. Stocked parts shown in table below, others available. Solder cup terminals. | |
 | DS-Deutsch DT Series-R0: | 2 to 12 position, low cost, environmentally sealed connectors for inline applications. Stocked parts shown in table below, others available. Special crimp tooling is highly recommended, but not required. | |
| | DS-Deutsch HD10 Series-R0 | 3 to 9 position, low cost, environmentally sealed connectors for inline and panel mount applications. Stocked parts shown in table below, others available. Special crimp tooling is highly recommended, but not required. | |
 | DS-EM-MP-08-R1: | A small electronic module designed to allow switch functions to be multiplexed. This allows 9 switches to control up to 16 functions. Available wired or unwired, with or without an enclosure. | |
| | DS-EM-MR-RY-R0: | A small relay based electronic module designed to control the direction of low voltage DC motors . Available as a bare board or in an enclosure. Wired or unwired. Available with a terminal strip for easy wiring. | |
| | DS-EM-MR-SS-R0: | A small electronic module designed to control the direction of low voltage DC motors . Available as a bare board or in an enclosure. Wired or unwired. Available with a terminal strip for easy wiring. Each unit can control 2 motors. | |
| | DS-EM-MS-01-R0: | A small (postage stamp) sized electronic module with two inputs and four outputs that can be programmed to perform a variety of simple logic and timing functions. A typical use would be to change momentary switch functions into. | |
| | DS-EM-MS-02-A-R0: | A small programmable multi-use controller board with digital and analog inputs and digital and analog outputs. Available as a bare board or in an enclosure. Various programs available, both “stock” and custom. Wired or unwired. Fits inside our L, S, H, and O series grips. Designed to drive the Danfoss PVG 32/120 valves, but software can be customized for many other applications. | |
| | DS-EM-MS-02-R0: | A small programmable multi-use controller board with digital and analog inputs and digital outputs. Available as a bare board or in an enclosure. Various programs available, both “stock” and custom. Wired or unwired. Fits inside our L, S, H, and O series grips. | |
| | DS-EM-SC-01-R0: | A small electronic module that takes a 0 to 5 VDC input (like our Hall Effect joysticks) and converts it to a -10 to +10 VDC output. This is a dual input device that will convert both axes of an X-Y joystick. Several auxiliary reference outputs are also available. Available as a bare board or in an enclosure, with terminal strips or hard wired. | |
| | DS-EM-SC-02-R0: | A small electronic module that takes a 12 VDC input and gives -10 and +10 VDC reference outputs. Typical use is as a supply voltage for potentiometric joysticks where the desired output is -10 to +10 VDC. Available as a bare board or in an enclosure, with terminal strips or hard wired. | |
| | DS-EM-SC-03-R0: | A small electronic module that takes a 0 to 10 VDC input (or any fraction thereof) and gives a 0 to 20 mA or 4 to 20 mA current output. The output can also be configured to switch polarity at the input midpoint. Available as a bare board or in an enclosure, with terminal strips or hard wired. | |
| | DS-EM-SC-04-R0: | A small electronic module that takes a 0 to 100 percent PWM signal and converts it to an analog output voltage. It is typically used to convert the PWM valve driver signal to a voltage output signal that is able to control the Danfoss PVG 32/120 series valves Available as a bare board or in an enclosure, with terminal strips or hard wired. | |
| | DS-EM-TF-__-R0: | A small electronic module that fits inside most of our grip or pendant products. When activated it causes the grip to vibrate, providing a tactile feedback alert for the operator. The module has an onboard microprocessor, so the vibration patterns can be customized in both pattern and duration to send different “messages” as needed. | |
| | DS-EM-USB-01-R0: | A joystick/grip to USB (1.1, 2.0, 3.0) interface adaptor, capable of supporting 2 dual axis joysticks and 12 button inputs. Microsoft Windows recognizes the device and uses the native joystick drivers. Available as a board assembly or in an enclosure. A version that fits inside our JS-01 and JS-02 is also available. | |
| | DS-EN-11-R0: | IP 68 rated enclosures in various configurations. Black or clear, vented or non-vented, end caps with 0, 1 or 2 molded in connectors. We also offer custom printed circuit boards and a universal “bread board” style that can be used for prototyping or short run production. | |
| | DS-EOP-R0: | Description: An electronic Operator Presence sensor that fits inside our L and S series grips. | |
| | DS-JS-01,02-R0: | Single or dual axis, analog output joystick. All axes use Hall effect sensors for long life. Can be supplied with a plain knob, or a S, M, L, B, K, or P series grip. | |
| | DS-JS-03-R0: | Triple axis, analog output mini joystick. All axes use Hall effect sensors for long life. Single and dual axis versions available as a special order item. | |
| | DS-JS-04-R0: | Single or dual axis, switched output joystick. All axes use snap action switches for long life and low replacement cost. Can be supplied with a plain knob, or a S, M, L, B, K, or P series grip. | |
| | DS-JS-05-R0: | Dual axis, switched output joystick. Features single or dual pole switch arrangements. Can be gated for single axis operation. Can also be gated for dual axis “cross” operation, or left ungated. | |
| | DS-JS-07-R0: | Single axis, proportional output joystick. Features center tapped potentiometer and on/off directional switch. | |
| | DS-JS-09-R0: | Single axis potentiometric joystick. Available in many different configurations, including spring return to center, spring return to end, and friction lock. Other options include switches at end of travel and center detent (lock). Any of our L, M, S, P, or B series grips can be mounted on this joystick. | |
| | DS-L Plastic-R0: | L Series injection molded plastic parts in various colors. Custom colors available, please inquire. | |
| | DS-M Plastic-R0: | M Series injection molded plastic parts in various colors. Custom colors available, please inquire. | |
| | DS-MOP-R0: | A switched Operator Presence device that fits inside our L and S series grips. As a special order, we can fit the MOP feature to several of our other grips. | |
| | DS-Metripack 150-R0: | 1 to 10 position, low cost, environmentally sealed connectors for inline applications. Stocked parts shown in table below, others available. Special crimp tooling is recommended, but not required. | |
| | DS-NT-__-R0: | Various hex nuts used in our products or available as mounting accessories. Others available. | |
| | DS-P-Series-Grip-R0: | A basic post style grip, available as a plain control handle or with up to three switches. | |
| | DS-PB-2PR-A-R1: | The PB-2PR-A is a Hall Effect voltage output proportional pushbutton module. The unit is a self contained device that can be mounted in most faceplate locations of our L, M, S, O or P grips, or any customer specified panel mount application. Small size, easy mounting and long operating life make the PB-2PR-A assembly an excellent choice for anywhere a pushbutton based variable speed control is needed. | |
| | DS-Packard 56 Series-R0: | 1 to 8 position, very low cost, unsealed connectors for inline applications. Stocked parts shown in table below, others available. Special crimp tooling is recommended, but not required. | |
| | DS-RK-1PR-R0: | The RK-1PR is a Hall Effect voltage output proportional rocker module. The unit is a self contained device that can be panel mounted in many faceplate locations of our L, X, S, O, or H grips, or any customer specified panel mount application. The rocker has a spring return to center feature for full single axis control. Small size, easy mounting and long operating life make the RK-1PR assembly an excellent choice for anywhere a rocker based variable speed control is needed. | |
| | DS-RK-xPR-A-R0: | The RK-?PR-A is a Hall Effect voltage output proportional rocker module. The unit is a self contained device that can be panel mounted in many faceplate locations of our L, M, S, O, H or P grips, or any customer specified panel mount application. Spring return to center, spring return to end, or friction detent are all available. Small size, easy mounting and long operating life make the PB-2PR-A assembly an excellent choice for anywhere a rocker based variable speed control is needed | |
| | DS-RK-xPR-A-R0: | The RK-?PR-A is a Hall Effect voltage output proportional rocker module. The unit is a self contained device that can be panel mounted in many faceplate locations of our L, M, S, O, H or P grips, or any customer specified panel mount application. Spring return to center, spring return to end, or friction detent are all available. Small size, easy mounting and long operating life make the PB-2PR-A assembly an excellent choice for anywhere a rocker based variable speed control is needed | |
| | DS-S Plastic-R0: | S Series injection molded plastic parts in various colors. Custom colors available, please inquire. | |
| | DS-SC-__-R0: | Various fasteners used in our products or available as mounting accessories. Others available. | |
| | DS-SC-xx-R0: | Various fasteners used in our products or available as mounting accessories. Others available. | |
| | DS-SW-HS-A-R0: | Dual axis, switched output panel mount mini joystick. Designed to mount in the faceplate of many of our grip models (M Series shown), but also available as a separate assembly for customer installation. | |
| | DS-Weather-Pack-R0: | 1 to 22 position, low cost, environmentally sealed connectors for inline and bulkhead applications. Stocked parts shown in table below, others available. Special crimp tooling is recommended, but not required. | |
| | DS-X Plastic-R0: | X Series injection molded plastic parts in black. Custom colors available, please inquire. | |
1-877-377-1117
info@controlgrips.com
Recent Comments