Dual axis, analog output, full size, hall effect sensors.
JS-02 with stock grip removed
The standard output is 0.5V to 2.5V (center) to 4.5V DC. High current switched outputs and CAN (CanOpen or J1939) are available as options. The joystick housing incorporates a 6 pin Deutsch connector for the electrical connection.
The JS-02 comes stock with a plain knob, but any of our “S”, “X”, “P”, “K” or “L” grips can be added.
Integrated control electronics available.
|Height||77mm above the panel (with plain knob)|
|Length||64mm diameter (above panel)|
|Width||64mm diameter (above panel)|
|Angle||X and Y: +/- 20 degrees|
|Life||> 4 Million Cycles
|Supply Voltage||Minimum 4.5 VDC, Maximum 5.5 VDC, Typically 5.0 VDC|
|Supply Current||15 mA|
|Output Voltage||Minimum 0.5 VDC, Maximum 4.5 VDC, 2.5 VDC in neutral position, each axis|
|Output Current||2 mA|
|Operating Temp.||Minimum -40 °C, Maximum 70 °C|
|IP Rating||IP 65 Above Panel (with plain knob)|
Factory calibrated output
Low power consumption