Signal Conditioners
Some uses include converting joysticks, potentiometers, etc. into standard industrial control signals.
EM-SC-01
The EM-SC-01 is an electronic module that converts a 0 to 5 VDC input voltage to a -10 to +10 output voltage.
- Bare board or in an enclosure
- Wired or unwired
- 2 channels per board
- Wiring instructions included
EM-SC-02
The EM-SC-02 is an electronic module that converts a 12 to 30 VDC input voltage to -10 to +10 output reference voltages.
- Bare board or in an enclosure
- 2 channels per board
- Wiring instructions included
- Custom configurations available
EM-SC-03
The EM-SC-03 is an electronic module that converts a 0 to 5 or 0 to 10 VDC input voltage to a 0 to 20 or 4 to 20 mA output.
- Bare board or in an enclosure
- Wired or unwired
- Polarity reversible
- Open loop alarm
- Wiring instructions included
EM-SC-04
The EM-SC-04 is an electronic module that converts a PWM input signal to an analog output voltage.
- Bare board or in an enclosure
- Wired or unwired
- Suitable for driving the Danfoss PVG 32/120 series of valves from a PWM signal source
- Wiring instructions included